The Sodick AD55L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AD55L sinker EDM: 600 × 400 × 400 mm X/Y/Z travel, 750 × 550 mm table, 1,000 kg workpieces, 1,200 × 800 × 500 mm tank, 4,600 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 29.53 in × 21.65 in (750 × 550 mm) |
| Approx. Machine Weight | 10,140 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 23.62 in (600 mm) |
| Y-Axis Travel | 15.75 in (400 mm) |
| Z-Axis Travel | 15.75 in (400 mm) |
| Table Size | 29.53 in × 21.65 in (750 × 550 mm) |
| Work Tank Size | 47.25 in × 31.50 in × 19.69 in (1,200 × 800 × 500 mm) |
| Work Tank Fluid Level | 6.69 in - 17.72 in (170 - 450 mm) |
| Dielectric Capacity | 124 gal (470 L) |
| Floor To Table | 35.43 in (900 mm) |
| Footprint | 91.93 in × 91.54 in × 107.09 in (2,335 × 2,325 × 2,720 mm) |
| Max Workpiece Weight | 2,204 lb (1,000 kg) |
| Machine Weight | 10,140 lb (4,600 kg) |
According to secondary market equipment benchmarks for November 2026, the Sodick AD55L is estimated between $48,000 and $97,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $744 / month.
Both have a 750 × 550 mm table and 23.62 in (600 mm) of X. The AD55L has 15.75 in (400 mm) of Y and Z; the AL60G has 16.54 in (420 mm) of Y and 14.57 in (370 mm) of Z, takes heavier workpieces at 3,307 lb (1,500 kg) and weighs 11,794.73 lb (5,350 kg) against 10,140 lb (4,600 kg).
Up to 2,204 lb (1,000 kg) on a 29.53 in × 21.65 in (750 × 550 mm) table. The tank is 1,200 × 800 × 500 mm, so a part can overhang the table inside the tank, but anything machined fully submerged must sit below the 17.72 in (450 mm) maximum fluid level.
According to secondary market equipment benchmarks for November 2026, the Sodick AD55L is estimated between $48,000 and $97,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $744 / month.
The machine measures 91.93 in × 91.54 in × 107.09 in (2,335 × 2,325 × 2,720 mm) and weighs 10,140 lb (4,600 kg). The table is 35.43 in (900 mm) above the floor, so plan a hoist for heavy plates.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.