The Sodick AG35L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick GENESIS LN CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG35L sinker EDM: listed 350 x 250 x 250 mm X/Y/Z travel, 750 x 550 x 350 mm max workpiece, 600 kg, linear motors. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick GENESIS LN CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 350 mm (13.8 in) |
| Y-Axis Travel | 250 mm (9.8 in) |
| Z-Axis Travel | 250 mm (9.8 in) |
| Max Workpiece Size | 750 x 550 x 350 mm (29.5 x 21.7 x 13.8 in) |
| Max Workpiece Weight | 600 kg (1,323 lb) |
| Drive System | Linear motor (all axes — no ballscrew) |
| Positioning Accuracy | ±0.001 mm |
| Repeatability | ±0.0005 mm |
| Surface Finish | Ra 0.10 µm (fine-finish mode) |
| Generator | Sodick ACTIVE3 with IPM (Intelligent Power Management) |
| Max Generator Current | 40 A |
| Orbiting | Yes (3D orbiting cycles) |
| Jump Cycle | Automatic Z-axis jump |
| Machine Base | LP3 ceramic composite (Sodick proprietary) |
| Dielectric | EDM oil (petroleum-based) |
| Tank Capacity | 400 L (106 gal) |
| Machine Weight | 3,000 kg (6,614 lb) |
| CNC Control | Sodick GENESIS LN CNC |
| Electrical | 200/220 VAC 3-phase 50/60 Hz |
According to secondary market equipment benchmarks for November 2026, the Sodick AG35L is estimated between $49,000 and $98,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
It does not appear in Sodick's current lineup. The current AD35L covers the same 13.78 in (350 mm) of X and 9.84 in (250 mm) of Y, with 10.63 in (270 mm) of Z and a 1,212 lb (550 kg) workpiece limit.
The listed maximum workpiece is 750 x 550 x 350 mm (29.5 x 21.7 x 13.8 in) and 600 kg (1,323 lb). Only the area within 350 mm of X and 250 mm of Y can be reached in one setup, so a part of full size may need repositioning to reach every feature.
According to secondary market equipment benchmarks for November 2026, the Sodick AG35L is estimated between $49,000 and $98,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
The listed control is a Sodick GENESIS LN CNC, with 3D orbiting cycles, an automatic Z-axis jump and an ACTIVE3 generator at 40 A maximum current. Run each function on the machine before buying, because these rows have not been checked against Sodick.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.