The Sodick AG600 is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN2W CNC with K-SMC adaptive control. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG600 sinker EDM: listed 800 x 600 x 500 mm travel, 1,200 x 800 mm table, 2,000 kg workpieces, 160 A peak generator. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN2W CNC with K-SMC adaptive control |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 1,200 mm × 800 mm |
| Approx. Machine Weight | 12,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 500 mm |
| Table Size | 1,200 mm × 800 mm |
| Max Workpiece Weight | 2,000 kg |
| Generator Amperage | 160 A peak (high-current SP digital generator) |
| Surface Finish | Ra 0.2 µm (fine-finish conditions) |
| Dielectric | Dielectric oil with temperature-controlled circulation |
| CNC Control | Sodick LN2W CNC with K-SMC adaptive control |
| Machine Weight | Approx. 12,000 kg |
According to secondary market equipment benchmarks for November 2026, the Sodick AG600 is estimated between $50,500 and $101,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
It is not in Sodick's current lineup. For a new machine of similar size, the AL80G+ offers 33.46 in (850 mm) of X, 20.47 in (520 mm) of Y and 16.53 in (420 mm) of Z on a 43.31 in × 27.56 in (1,100 × 700 mm) table.
The listed table is 1,200 mm × 800 mm with a 2,000 kg workpiece limit, and the travels are 800 mm, 600 mm and 500 mm. The table gives no work tank size, so measure the tank before planning a part close to the table's size.
The AG80L page lists the same 800 mm X, 600 mm Y and 500 mm Z, but a 5,000 kg workpiece limit and 9,500 kg machine weight against 2,000 kg and approx. 12,000 kg here. Neither table has been checked against Sodick, so confirm the model and measure.
The listed table names a high-current SP digital generator rated at 160 A peak, with a Sodick LN2W CNC and K-SMC adaptive control. Fine-finish conditions are listed at Ra 0.2 µm. Check the generator's rating plate on a used machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.