The Sodick AG600L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN2W CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG600L wire EDM, an older model: 600 x 400 mm X/Y, listed 800 kg and 1050 x 820 x 370 mm part capacity, ±30° taper, 0.1-0.3 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN2W CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Y Travel | 600 x 400 mm (23.6 x 15.7 in) |
| Z Travel U Axis Stroke | 370 mm (14.6 in) |
| U V Travel | ±80 mm (±3.1 in) |
| Max Workpiece Dimensions | 1050 x 820 x 370 mm |
| Max Workpiece Weight | 800 kg (1,764 lb) |
| Wire Diameter Range | 0.1 – 0.3 mm (brass or coated wire) |
| Max Cutting Speed | 450 mm²/min (in 50 mm steel with 0.25 mm wire) |
| Surface Finish | Ra 0.1 µm (final skim passes on steel) |
| Max Taper Angle | ±30° over 100 mm height |
| Drive System | All-axis linear motor (no ballscrews) |
| Generator | Sodick SP digital generator with K-SMC adaptive control |
| Auto Wire Threading | Yes — water-jet assist, auto re-thread at breaks |
| CNC Control | Sodick LN2W CNC |
| Power Supply | 200V, 3-phase, 50/60 Hz |
| X Y Z Travel | 600 x 400 x 300 mm |
| Surface Finish Ra | Ra 0.1 µm |
| Taper Angle | ±30° / 100 mm |
| Control System | Sodick LN (Windows-based) |
| Machine Weight | ~5,800 kg |
According to secondary market equipment benchmarks for November 2026, the Sodick AG600L is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
It is not in Sodick's current lineup and is most likely an older model. A buyer will be looking at a used machine, so check its condition and measure its travels rather than relying on a spec sheet.
X/Y is listed as 600 x 400 mm (23.6 x 15.7 in), with ±80 mm (±3.1 in) of U/V. Z is listed as 370 mm (14.6 in) in one row and 300 mm in another, so confirm it on the machine.
The listed figures give 800 kg (1,764 lb) and a maximum part size of 1050 x 820 x 370 mm. The machine itself is listed at ~5,800 kg, so plan the floor for both.
The ALC600G covers the same X/Y class with 23.62 in (600 mm), 15.75 in (400 mm) and 13.78 in (350 mm) of travel and weighs 10,141 lb (4,600 kg).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.