The Sodick AG600LH is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG600LH wire EDM, an older model: 600 x 400 x 420 mm travels, 900 x 620 mm table, 1,500 kg part weight, ±15° taper, 0.10-0.30 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 8,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 600 mm (23.6 in) |
| Y-Axis Travel | 400 mm (15.7 in) |
| Z-Axis Travel | 420 mm (16.5 in) |
| Uv Taper Range | ±15° / 100 mm height |
| Work Table Size | 900 x 620 mm (35.4 x 24.4 in) |
| Max Workpiece Weight | 1,500 kg (3,307 lb) |
| Max Workpiece Height | 420 mm (16.5 in) |
| Wire Diameter Range | 0.10 - 0.30 mm |
| Drive System | Linear Hybrid — linear motors (X, Y, U, V axes) with enhanced thermal compensation |
| Generator | SP9 with enhanced e-pak discharge circuit |
| Surface Finish | Ra 0.10 um achievable (near mirror finish) |
| Positioning Accuracy | ±0.001 mm |
| CNC Control | Sodick LQ controller |
| Awt | Automatic wire threading with in-cut re-threading |
| Machine Weight | approx. 8,500 kg (18,739 lb) |
According to secondary market equipment benchmarks for November 2026, the Sodick AG600LH is estimated between $50,000 and $100,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
It is not in Sodick's current lineup and is most likely an older model. Buyers will be looking at used machines, and the listed figures could not be checked against a manufacturer page.
The listed range is ±15° / 100 mm height. That is enough for typical die clearance but not for steep tapered profiles, so test the range on the actual machine.
Both cover 600 mm of X and 400 mm of Y. The AL600G has 350 mm of Z and weighs 4,600 kg; the AG600LH is listed with 420 mm of Z and approx. 8,500 kg. The AL600G is a current model.
The listed figures give 1,500 kg (3,307 lb) and a maximum height of 420 mm (16.5 in) on a 900 x 620 mm (35.4 x 24.4 in) table, with the cut path inside 600 x 400 mm of travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.