The Sodick AGL Series Sinker EDM is an industrial-grade CNC Wire & Sinker EDM powered by the OS built-in multitasking NC unit, K-SMC-LINK method, 15-inch TFT-LCD touch panel; editing 100,000 bl. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AGL Series Sinker EDM: AG40L 400 x 300 x 270 mm and AG60L 600 x 420 x 370 mm strokes, linear motors, 40 A, workpieces to 1,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | OS built-in multitasking NC unit, K-SMC-LINK method, 15-inch TFT-LCD touch panel; editing 100,000 bl |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 40 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Models In Series | AG40L / AG40LP and AG60L linear-motor sinker EDMs |
| Table Dimensions | AG40L: 600 x 400 mm (ceramic); AG60L: 750 x 550 mm (ceramic) |
| Work Tank Inner Dimensions | AG40L: 750 x 620 x 350 mm; AG60L: 950 x 740 x 450 mm |
| Liquid Level Adjustable Range | AG40L: 100 – 300 mm; AG60L: 150 – 400 mm from table surface |
| Max Machining Tank Capacity | AG40L: 190 L; AG60L: 330 L |
| X Axis Stroke | AG40L: 400 mm (15.7 in); AG60L: 600 mm (23.6 in) |
| Y Axis Stroke | AG40L: 300 mm (11.8 in); AG60L: 420 mm (16.5 in) |
| Z Axis Stroke | AG40L: 270 mm (10.6 in); AG60L: 370 mm (14.6 in) |
| Max Workpiece Weight | AG40L: 550 kg (1,213 lb); AG60L: 1,500 kg (3,307 lb) |
| Max Suspended Weight | 50 kg (20 kg AG40LP) |
| Distance Workpiece Mounting Surface To Table | AG40L: 150 – 420 mm; AG60L: 200 – 570 mm |
| Machine Dimensions Wxdxh | AG40L: 1,550 x 2,440 x 2,330 mm (AG40LP: 1,550 x 2,407 x 2,330 mm); AG60L: 1,740 x 2,785 x 2,570 mm |
| Machine Weight | AG40L: 4,000 kg; AG60L: 5,150 kg (power supply and service tank included) |
| Total Electric Capacity | 3-phase 50/60 Hz, 10 kVA |
| Air Supply | 0.65 MPa, 100 NL/min |
| Max Machining Current | 40 A |
| Discharge Power Supply | TMM3 power supply for ideal pulse control (Arc-less, SVC circuit) |
| Power Supply Input | 200/220 V, 50/60 Hz |
| CNC Control | OS built-in multitasking NC unit, K-SMC-LINK method, 15-inch TFT-LCD touch panel; editing 100,000 blocks, 30 MB storage |
| Simultaneously Controlled Axes | max. 4 axes (LP20: 6 / 8 axis specification) |
| Min Command Unit | 0.1 µm |
| Ajc Speed | X, Y: max. 10 m/min; Z: max. 36 m/min |
| Max Feed Speed Xyz | 6 m/min |
| Position Detection | Full closed loop (linear scale) |
| Drive System | Linear motor |
| Machining Fluid | Electric discharge machining oil; required capacity AG40L 285 L (330 L with service tank), AG60L 465 L (560 L); replaceable paper filter |
| Clamp Chuck Options | EROWA COMBI / ITS, System 3R COMBI / MACRO, TP specification |
According to secondary market equipment benchmarks for November 2026, the Sodick AGL Series Sinker EDM is estimated between $50,000 and $100,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
Size and load. The AG40L has 400 x 300 x 270 mm strokes, a 600 x 400 mm table, a 750 x 620 x 350 mm tank and a 550 kg workpiece limit. The AG60L has 600 x 420 x 370 mm, a 750 x 550 mm table, a 950 x 740 x 450 mm tank and 1,500 kg. Both use the TMM3 power supply at 40 A.
A variant of the AG40L with a lower suspended electrode limit, 20 kg against 50 kg, and a machine depth of 2,407 mm against 2,440 mm. The series table gives it no separate travels, table or tank figures, so confirm those with Sodick if they matter to the job.
A 200/220 V, 50/60 Hz 3-phase supply with 10 kVA total electric capacity, and compressed air at 0.65 MPa and 100 NL/min. The figures are the same for the AG40L and the AG60L.
An OS built-in multitasking NC unit using the K-SMC-LINK method, with a 15-inch TFT-LCD touch panel, 100,000 blocks of editing and 30 MB of storage. It controls up to 4 axes simultaneously, with feedback from linear scales in a full closed loop.
According to secondary market equipment benchmarks for November 2026, the Sodick AGL Series Sinker EDM is estimated between $50,000 and $100,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.