The Sodick AL1000G is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AL1000G linear-motor sinker EDM: 1,000 x 800 x 500 mm travels, 1,250 x 1,000 mm table, 4,000 kg workpiece, 18,000 kg. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 18,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,000 mm (39.4 in) |
| Y-Axis Travel | 800 mm (31.5 in) |
| Z-Axis Travel | 500 mm (19.7 in) |
| Work Table Size | 1,250 x 1,000 mm (49.2 x 39.4 in) |
| Work Tank Inner | 1,500 x 1,200 x 600 mm (59.1 x 47.2 x 23.6 in) |
| Max Workpiece Weight | 4,000 kg (8,818 lb) |
| Electrode To Table Clearance | 200 - 700 mm (7.9 - 27.6 in) |
| Axis Feed Rate | 36,000 mm/min (1,400 ipm) |
| Acceleration | 1.2G |
| Drive System | Linear motors (X, Y, Z) |
| Generator | TMM3 with zero-wear and e-pack fine-pulse |
| Surface Finish | VDI 4 / Ra 0.10 um (with e-pack fine-pulse) |
| Electrode Wear | Near-zero on finishing (zero-wear circuit) |
| CNC Control | Sodick LQ controller |
| Machine Dimensions | 4,100 x 3,800 x 3,200 mm (161 x 150 x 126 in) |
| Machine Weight | 18,000 kg (39,683 lb) |
According to secondary market equipment benchmarks for November 2026, the Sodick AL1000G is estimated between $50,000 and $100,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
The AL1000G is not in Sodick's current lineup and may be an older model. Its table has not been checked against Sodick's documents, so a buyer should confirm the travels, tank size and weight on the machine and ask for its service history before relying on the listed figures.
The table is 1,250 x 1,000 mm (49.2 x 39.4 in), the tank is 1,500 x 1,200 x 600 mm (59.1 x 47.2 x 23.6 in) inside and the workpiece limit is 4,000 kg (8,818 lb). The electrode reaches 1,000 x 800 mm (39.4 x 31.5 in) of the plate, and the workpiece and electrode together must fit within the 200 - 700 mm (7.9 - 27.6 in) electrode-to-table clearance.
The AL100G lists 47.24 in (1,200 mm) of X, 25.60 in (650 mm) of Y and 19.69 in (500 mm) of Z on a 63.0 in × 39.37 in (1,600 × 1,000 mm) table, at 27,557.78 lb (12,500 kg). The AL1000G lists 1,000 x 800 x 500 mm (39.4 x 31.5 x 19.7 in) on a 1,250 x 1,000 mm table at 18,000 kg (39,683 lb), so it is shorter in X, longer in Y and much heavier.
The listed table gives a TMM3 generator with a zero-wear circuit and e-pack fine-pulse, and the Sodick LQ controller. With e-pack fine-pulse the listed finish is VDI 4 / Ra 0.10 µm, and electrode wear on finishing is described as near-zero. Check that a used machine has the e-pack circuit fitted.
The machine is listed at 4,100 x 3,800 x 3,200 mm (161 x 150 x 126 in) and 18,000 kg (39,683 lb). That calls for a floor rated for the load, access for a crane or heavy rigging, and headroom above the 3,200 mm height for opening and service.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.