The Sodick AQ900L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AQ900L wire EDM: 35.43 x 23.62 x 15.75 in (900 x 600 x 400 mm) travels, 4,409 lb (2,000 kg) workpiece, 0.15-0.30 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 17,637 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 35.43 in (900 mm) |
| Y-Axis Travel | 23.62 in (600 mm) |
| Z-Axis Travel | 15.75 in (400 mm) |
| Uv Axis Travel | 36.22 in × 24.41 in (920 × 620 mm) |
| Wire Diameter | 0.006 in - 0.012 in (0.15 - 0.30 mm) |
| Work Tank Size | 54.09 in × 44.61 in (1,374 × 1,133 mm) |
| Max Workpiece Weight | 4,409 lb (2,000 kg) |
| Floor To Table | 41.34 in (1,050 mm) |
| Footprint | 93.70 in × 124.02 in × 94.29 in (2,380 × 3,150 × 2,395 mm) |
| Machine Weight | 17,637 lb (8,000 kg) |
According to secondary market equipment benchmarks for November 2026, the Sodick AQ900L is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
The AQ1200L moves up to 47.24 in (1,200 mm) of X and 31.50 in (800 mm) of Y on the same 15.75 in (400 mm) of Z, and weighs 24,251 lb (11,000 kg) against 17,637 lb (8,000 kg) for the AQ900L. If parts fit within 35.43 in × 23.62 in (900 × 600 mm), the AQ900L is the smaller and lighter install.
It depends on the shape of the work. The ALN800G has 31.50 in (800 mm) of X, 23.62 in (600 mm) of Y and 19.69 in (500 mm) of Z and weighs 12,125 lb (5,550 kg). The AQ900L trades Z for X, with 35.43 in (900 mm) of X and 15.75 in (400 mm) of Z.
Sodick lists U/V travel of 36.22 in × 24.41 in (920 × 620 mm) for this model but no taper angle. Because the U/V figure is larger than the X/Y travel, it does not tell you the taper limit directly; ask Sodick for the maximum angle at your plate thickness.
According to secondary market equipment benchmarks for November 2026, the Sodick AQ900L is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.