The Sodick VLP600Q is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN (Linear iQ) control with VLP condition library. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick VLP600Q wire EDM (older model): 600 x 400 x 300 mm travels, 800 x 600 mm table, 800 kg workpieces, listed Ra 0.05 µm finish.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN (Linear iQ) control with VLP condition library |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 800 x 600 mm |
| Approx. Machine Weight | 5,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 800 x 600 mm |
| X-Axis Travel | 600 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 300 mm |
| Max Workpiece Weight | 800 kg |
| Max Workpiece Height | 275 mm |
| Generator Power | VLP digital ultra-low-power generator, 4A peak (fine-finish mode) |
| Surface Finish | Ra 0.05 µm (ultra-fine mirror finish capable) |
| CNC Control | Sodick LN (Linear iQ) control with VLP condition library |
| Machine Weight | 5,800 kg |
According to secondary market equipment benchmarks for November 2026, the Sodick VLP600Q is estimated between $44,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
It does not appear in Sodick's current lineup and may be an older model. The listed figures could not be checked against a manufacturer source, so confirm travels, generator and control on the machine itself before buying.
The listed limits are 800 kg and 275 mm in height, on an 800 x 600 mm table with 600 mm of X, 400 mm of Y and 300 mm of Z travel. Allow room for clamps and the guide heads when sizing a part against those figures.
The listed table gives Ra 0.05 µm, with a VLP digital ultra-low-power generator at 4A peak in fine-finish mode. On a used machine the finish depends on the generator, condition library and wire path being in order, so ask for a sample cut in your own material.
Both list 600 mm of X and 400 mm of Y. The AL600G lists 350 mm of Z and 4,600 kg, against 300 mm and 5,800 kg for the VLP600Q.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.