The Star Micronics SR-32J / SR-32JN is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SR-32J / SR-32JN Swiss-type lathe: 32 mm (1.26 in) bar, up to 10 axes with Y1 and Y2; guide bushing on the SR-32J, none on the SR-32JN.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.26 in) |
| Max Machining Diameter | 32 mm (1.26 in) |
| Number Of Axes | Up to 10 (including Y1, Y2, C1, C2) |
| Guide Bushing | SR-32J: Yes / SR-32JN: Non-guide bushing |
| Power Consumption | 12 kVA |
| Max Turning Diameter | ø32mm (1-1/4in) |
| Bar Capacity | ø32mm (1-1/4in) |
| Cnc Control | Fanuc 32i-B |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SR-32J / SR-32JN is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
The guide bushing. The table lists the SR-32J with a guide bushing and the SR-32JN as non-guide bushing. Bar size, axis count, control and supply requirement are given once for both. Pick the SR-32J for long parts that need support at the cut and the SR-32JN for short parts.
Maximum bar capacity and machining diameter are 32 mm (1.26 in), also stated as ø32mm (1-1/4in). This table shows no larger optional size, so confirm with Star if your stock runs above 32 mm.
Up to 10 axes, including Y1, Y2, C1 and C2, under a Fanuc 32i-B control. A Y axis and a C axis for each side allow milled and cross-drilled features off the centreline on both ends. The wording is "up to", so check the axis list of the machine quoted.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.