The Takisawa TT-1100G is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Takisawa TT-1100G twin-chuck CNC lathe with loader: 6 + 6 in chucks, 140 mm turning diameter, 1.7 s loading time, 4,500 rpm, 14-pallet stocker.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Takisawa (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Motor Rating | 5.5 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 6 + 6 in (152 + 152 mm) |
| Turret Stations | 10 stations (all-holder turret), left and right |
| Max Turning Diameter | 140 mm (5.5 in) |
| Max Turning Length | 121 mm (4.8 in) |
| Max Spindle Speed | 4,500 rpm (option 6,500 rpm) |
| Spindle Motor Power | 5.5 / 3.7 kW (7.4 / 5.0 hp), 15-min / continuous; option 7.5 / 5.5 kW (10.1 / 7.4 hp) |
| Rapid Traverse | X 24 / Z 30 m/min (945 / 1,181 in/min) |
| Loader Workpiece | φ80 × 80 mm (3.1 × 3.1 in), 0.7 kg (1.5 lb) ×2 |
| Loading Time | 1.7 s |
| Work Stocker | 14 pallets, 25 kg (55 lb) per pallet, 450 mm (17.7 in) stacking height |
| Machine Dimensions | 2,258 × 3,327 mm floor space, 2,450 mm high (88.9 × 131.0 × 96.5 in) |
| Machine Weight | 5,800 kg (12,787 lb) |
According to secondary market equipment benchmarks for November 2026, the Takisawa TT-1100G is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
Up to φ80 × 80 mm (3.1 × 3.1 in) and 0.7 kg (1.5 lb), with the weight marked ×2 in the table. The lathe itself is listed with a maximum turning diameter of 140 mm (5.5 in) and a turning length of 121 mm (4.8 in), so the loader, not the chuck, sets the largest part in automatic running.
The table gives a loading time of 1.7 s. On parts with cutting cycles of well under a minute, load time is a large share of the total, so this figure matters more than the rapids of X 24 / Z 30 m/min (945 / 1,181 in/min). The table does not state how the time is measured, so ask whether it covers a full exchange of finished and raw part.
Each side has a 10-station all-holder turret, one on the left and one on the right, serving the two 6 in (152 mm) chucks. No 12-station option is listed for this model, whereas the TT-2100G can be ordered with 12 stations.
The TT-2100G is the larger loader lathe: 240 mm (9.4 in) of turning diameter, a choice of 6 in or 8 in chuck pairs, and a rotary-tool version, the TT-2100CMG. The TT-1100G is limited to 140 mm (5.5 in) and 6 in chucks, but its Z rapid is 30 m/min (1,181 in/min) where the TT-2100G lists 24 m/min (945 in/min), and its optional spindle reaches 6,500 rpm.
The standard motor is rated 5.5 kW (7.4 hp) at 15-min and 3.7 kW (5.0 hp) continuous. The optional motor is 7.5 / 5.5 kW (10.1 / 7.4 hp). Standard maximum speed is 4,500 rpm and the optional spindle runs to 6,500 rpm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.