The Tsugami B0128W is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B0128W 12 mm (0.47 in) Swiss-type lathe: eight listed axes including X3 and Y3, 25 tools, 12,000 rpm spindles at 1.5/2.2 kW, 2,150 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 1.5 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 25 Tool Stations |
| Approx. Machine Weight | 2,150 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 12 mm (0.47 in) |
| Max Spindle Speed | 12,000 rpm (rated 10,000 rpm) |
| Sub Spindle Speed | 12,000 rpm (rated 8,000 rpm) |
| Tool Capacity | 25 (standard) |
| Rapid Traverse | 32 m/min (Z1, X2, Z2), 24 m/min (Y1, Y3), 15 m/min (Y2), 12 m/min (X1, X3) |
| Spindle Motor Power | 1.5/2.2 kW |
| Sub Spindle Power | 1.5/2.2 kW |
| Footprint | 1,740 × 1,215 × 1,700 mm (68.5 × 47.8 × 66.9 in) |
| Machine Weight | 2,150 kg (4,740 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami B0128W is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
Bar capacity and main spindle. The B0128W takes 12 mm (0.47 in) bar and its main spindle runs to 12,000 rpm (rated 10,000 rpm) on a 1.5/2.2 kW motor. The B0208W takes 20 mm (0.79 in) bar, runs to 10,000 rpm (rated 8,000 rpm) and has a 2.2/3.7 kW main spindle. Footprint, weight, tool count and rapid rates are the same.
They appear in the rapid traverse row, Y3 at 24 m/min and X3 at 12 m/min, next to the X1, Y1, Z1 front axes and the X2, Y2, Z2 back-end axes. The table does not say which tools the third group carries or whether it can cut at the same time as the others, so ask Tsugami before planning cycles around it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.