The Tsugami B026-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF Plus (5-axis) / FANUC 32i-B (6-axis). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B026-III Swiss-type lathe with convertible guide bushing: 5-axis B0265B on FANUC 0i-TF Plus or 6-axis B0266 on FANUC 32i-B.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF Plus (5-axis) / FANUC 32i-B (6-axis) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Axes | 5 or 6 (B0265B=5-axis, B0266=6-axis) |
| Guide Bushing | Convertible (Swiss/chucker) |
| CNC Control | FANUC 0i-TF Plus (5-axis) / FANUC 32i-B (6-axis) |
According to secondary market equipment benchmarks for November 2026, the Tsugami B026-III is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
The listed table names the 5-axis machine B0265B, with a FANUC 0i-TF Plus control, and the 6-axis machine B0266, with a FANUC 32i-B. It gives no other figures for either, so ask for the specification sheet of the exact model before comparing them on capacity or speed.
The listed table describes the guide bushing as convertible between Swiss and chucker operation. Running on the bushing supports long, slender parts; running as a chucker suits short parts and leaves a shorter remnant at the end of each bar. The table gives no machining length for either mode.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.