The Tsugami B038-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 32i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B038-III Swiss-type lathe: 38 mm (1.5 in) bar, 6 axes, 7.5/11 kW 200-6,000 RPM main spindle, 32/42 tools with 15/26 live.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,850 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 38 mm (1.5 in) |
| Main Spindle Speed | 200-6,000 RPM |
| Sub Spindle Speed | 200-7,000 RPM |
| Spindle Motor | 7.5/11 kW |
| Axes | 6 (X1, Y1, Z1, X2, Y2, Z2, C1, C2) |
| Live Tool Speed | 6,000 RPM |
| Tool Positions Std Max | 32/42 |
| Live Tool Positions Std Max | 15/26 |
| Headstock Stroke With Guide Bushing | 320 mm (12.6 in) |
| Headstock Stroke Without Guide Bushing | 70 mm (2.75 in) |
| Rapid Traverse Rate | 32 m/min |
| Guide Bushing | Convertible (Swiss/chucker) |
| CNC Control | FANUC 32i-B |
| Machine Weight | 4,850 kg (10,694 lbs) |
| Dimensions | 2,240 x 1,515 x 2,050 mm (88 x 60 x 81 in) |
According to secondary market equipment benchmarks for November 2026, the Tsugami B038-III is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Six linear axes: X1, Y1, Z1 on one tool group and X2, Y2, Z2 on the other. The table also lists C1 and C2, the indexing axes of the main and sub-spindles. Y on both groups lets off-centre milling and drilling run on either side of the part.
The B038M runs to 7,000 rpm (rated 5,000 rpm) on a 3.7/5.5 kW motor, carries 40 tools and weighs 7,100 kg (15,653 lb). The B038-III is listed with a 7.5/11 kW main motor at 200-6,000 RPM, 32/42 tool positions and 4,850 kg (10,694 lbs). Pick on the balance of spindle power against tool count.
With the guide bushing the headstock stroke is 320 mm (12.6 in). Converted to run without it, the stroke is 70 mm (2.75 in). Long shafts belong on the bushing; short, stubby parts can run guide-bushless to leave a shorter remnant on each bar.
The main spindle runs 200-6,000 RPM on 7.5/11 kW and the sub-spindle 200-7,000 RPM, with live tools to 6,000 RPM. These are low speeds by Swiss-type standards because the machine is sized for 38 mm (1.5 in) bar, where cutting speed is reached at fewer revolutions.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.