The Tsugami HE10J is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 32i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami HE10J Swiss-type lathe, listed figures: 10 mm bar, 15,000 RPM main and 12,000 RPM sub spindle, 20 tool stations, 6 axes.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Diameter | 10 mm |
| Main Spindle Speed | 15,000 RPM |
| Sub Spindle Speed | 12,000 RPM |
| Driven Tool Speed | 8,000 RPM |
| Number Of Axes | 6 |
| Total Tool Stations | 20 |
| Max Part Length | 120 mm |
| Guide Bushing | Precision-ground, oil-lubricated |
| CNC Control | Fanuc 32i-B |
| Positioning Accuracy | ±0.001 mm |
| Machine Weight | Approx. 1,200 kg |
| Footprint W X D | 1,100 x 1,200 mm |
According to secondary market equipment benchmarks for November 2026, the Tsugami HE10J is estimated between $42,500 and $84,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
The HE10J does not appear on Tsugami's current product pages, so the figures on this page could not be checked against the maker. If you are looking at a used HE10J, ask the seller for the original specification sheet and compare it with the listed figures.
The listed figures give 15,000 RPM on the main spindle, 12,000 RPM on the sub spindle and 8,000 RPM on the driven tools. No spindle power is listed, so cutting capacity at the full 10 mm diameter cannot be judged from this table.
The table lists a 10 mm maximum bar diameter and a 120 mm maximum part length. Axis travels are not given, so confirm the machining length per chucking with Tsugami before quoting long slender parts.
The table lists a Fanuc 32i-B control and a precision-ground, oil-lubricated guide bushing. It also gives positioning accuracy of ±0.001 mm; ask how that figure was measured before relying on it for tolerance planning.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.