The Tsugami M08JL5-II is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami M08JL5-II long-bed CNC lathe: 500 mm turning length, 65 mm bar, 8 in chuck, 8 stations, 9/11 kW spindle to 4,000 rpm, 3,430 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 9.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,430 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 280 mm (11.0 in) |
| Bar Capacity | 65 mm (2.56 in) |
| Max Turning Length | 500 mm (19.7 in) |
| Chuck Size | 8 in |
| Max Spindle Speed | 4,000 rpm (rated 3,500 rpm); low-speed type 1,500 rpm (option) |
| Turret Stations | 8 |
| Rapid Traverse | 24 m/min (X), 27 m/min (Z) |
| Spindle Motor Power | 9/11 kW |
| Footprint | 2,170 × 1,778 × 1,600 mm (85.4 × 70.0 × 63.0 in) |
| Machine Weight | 3,430 kg (7,562 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami M08JL5-II is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Turning length and size. The M08JL5-II turns parts up to 500 mm (19.7 in) long and weighs 3,430 kg (7,562 lb). The M08J-II stops at 290 mm (11.4 in) and weighs 3,300 kg (7,275 lb). Bar capacity, chuck, turret and the 9/11 kW spindle are the same.
For length, yes: 500 mm (19.7 in) against 380 mm (15.0 in) on the M08D-II. The M08D-II has 12 stations rather than 8 and a 4,500 rpm spindle on 7.5/11 kW, so it remains the better fit for shorter parts with long tool lists.
The published table does not list one, nor a steady rest. For shafts approaching 500 mm (19.7 in), support at the free end usually decides the achievable finish and cut depth, so confirm the tailstock arrangement with Tsugami before ordering.
According to secondary market equipment benchmarks for November 2026, the Tsugami M08JL5-II is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.