The Tsugami S205-II is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 32i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami S205-II five-axis Swiss-type lathe: 20 mm (0.79 in) bar, 200-10,000 rpm main and sub spindles, 25/39 tool stations, FANUC 32i-B.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,750 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 20 mm (0.79 in) |
| Number Of Axes | 5 |
| Guide Bushing | Yes |
| Chucker Mode | Yes |
| Max Machining Length | 210 mm (9.84 in) with guide bushing; 45 mm (1.77 in) without |
| Tool Stations | 25/39 |
| Live Tool Stations | 7/16 |
| CNC Control | FANUC 32i-B |
| Main Spindle Speed | 200 - 10,000 rpm |
| Sub Spindle Speed | 200 - 10,000 rpm |
| Live Tool Speed | 10,000 rpm |
| Main Spindle Power | 2.2 / 3.7 kW (3 / 5 hp) |
| Machine Weight | 3,750 kg (8,267 lb) |
| Footprint | 2,325 × 1,270 × 1,970 mm (91 × 50 × 77.5 in) |
According to secondary market equipment benchmarks for November 2026, the Tsugami S205-II is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
The S206-II has six axes to the S205-II's five, 33 / 47 tool stations against 25/39, and 15 / 24 live-tool positions against 7/16. Bar capacity, the 200 - 10,000 rpm spindle range, 10,000 rpm live tools, the FANUC 32i-B control, the 3,750 kg (8,267 lb) weight and the footprint are the same on both.
Yes. Tsugami America lists chucker mode, in which the guide bushing is removed. Maximum machining length per chucking is then 45 mm (1.77 in), against 210 mm with the bushing. Chucker mode suits short parts and saves the bar remnant that a guide bushing leaves.
Of the 25/39 tool stations, 7/16 can take live tools, and live tools run to 10,000 rpm. That speed suits small drills and end mills. Live-tool power and torque are not in the table, so check them before planning heavy milling or large taps.
According to secondary market equipment benchmarks for November 2026, the Tsugami S205-II is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.