The DMG MORI DMC 85 FD monoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMC 85 FD monoBLOCK: 5-axis mill-turn with three-pallet changer, 935 x 850 x 650 mm travels, 1,512 ft lb table torque, parts to 1,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 800 mm (31.5 in) |
| Max Workpiece Height | 590 mm (23.2 in) |
| Max Workpiece Weight | 1,000 kg (2,204.6 lb) |
| X-Axis Travel | 935 mm (36.8 in) |
| Y-Axis Travel | 850 mm (33.5 in) |
| Z-Axis Travel | 650 mm (25.6 in) |
| Pallet Changer | Automatic pallet changer for a total of three pallets |
| Table Torque | 1,512 ft lb (mill-turn version) |
| Footprint | 280 ft² including chip conveyor and coolant system |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMC 85 FD monoBLOCK is estimated between $123,500 and $253,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,914 / month.
DMG MORI lists an automatic pallet changer for a total of three pallets. With three pallets, different parts or operations can be queued and the setup done away from the cut. Each workpiece can be up to 800 mm (31.5 in) in diameter, 590 mm (23.2 in) tall and 1,000 kg (2,204.6 lb).
The Highlights describe a mill-turn version for complete machining with 1,512 ft lb of table torque. They do not state the table speed, so ask for it together with the torque curve. Parts for turning must stay within 800 mm (31.5 in) diameter and 1,000 kg (2,204.6 lb) including workholding.
Travels are the same, 935 × 850 × 650 mm (36.8 × 33.5 × 25.6 in), and so is the 590 mm (23.2 in) maximum workpiece height. The DMU 85 FD monoBLOCK takes larger and heavier parts, 1,040 mm (40.9 in) and 1,500 kg (3,306.9 lb), against 800 mm (31.5 in) and 1,000 kg (2,204.6 lb) on the DMC 85 FD monoBLOCK, which in turn has the three-pallet changer.
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMC 85 FD monoBLOCK is estimated between $123,500 and $253,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,914 / month.
The technical data gives a maximum workpiece weight of 1,000 kg (2,204.6 lb). The Highlights repeat 2,204.6 lb as the maximum load and add crane loading into the working area up to 3,307 lb, with workpieces up to ø 31.5 in. They do not explain when the higher figure applies, so confirm it with DMG MORI before planning a part heavier than 1,000 kg (2,204.6 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.