The DMG MORI NVX 5100 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NVX 5100: 1,050 × 530 × 510 mm travels, workpieces to 1,350 mm and 1,200 kg, No. 40 or No. 50 taper spindle, slideways in X and Y.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | No. 40 taper (speedMASTER); No. 50 taper (powerMAS |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 1,350 mm (53.1 in) |
| Max Workpiece Width | 600 mm (23.6 in) |
| Max Workpiece Height | 510 mm (20.1 in) |
| Max Workpiece Weight | 1,200 kg (2,645.5 lb) |
| X-Axis Travel | 1,050 mm (41.3 in) |
| Y-Axis Travel | 530 mm (20.9 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Spindle Taper | No. 40 taper (speedMASTER); No. 50 taper (powerMASTER) |
| Guideways | Slideways (X- / Y-axis); roller guides (Z-axis) |
| Through Spindle Coolant | Option (unit on coolant tank) |
| Chip Conveyor | Internal, spiral type (option) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NVX 5100 is estimated between $52,000 and $91,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $806 / month.
X travel is 1,050 mm (41.3 in), and that is the length that can be cut in one setup. The machine accepts workpieces up to 1,350 mm (53.1 in) long, 600 mm (23.6 in) wide and 510 mm (20.1 in) high, weighing up to 1,200 kg (2,645.5 lb), so a part at full length has to be shifted to reach both ends.
The NVX 5080 has 800 mm (31.5 in) of X travel and the NVX 5100 has 1,050 mm (41.3 in). Y travel of 530 mm (20.9 in) and Z travel of 510 mm (20.1 in) are the same on both. Choose by part length and by how many fixtures need to stand in a row.
Two lines. speedMASTER is a No. 40 taper spindle for high-speed machining, for which DMG MORI cites improved run-out accuracy. powerMASTER is a No. 50 taper spindle for heavy-duty cutting, with thermal expansion compensation by a spindle growth sensor. The spindle is built as a complete unit including the rear bearing units to shorten replacement. Speeds and power are not given in the Highlights.
It can be, with options. DMG MORI lists a coolant tank for collecting casting sludge, a through-spindle coolant system with its unit on the coolant tank, and an internal spiral-type chip conveyor, each marked as an option. The No. 50 taper powerMASTER spindle is the one described for heavy-duty cutting.
The CMX 1100 V has 1,100 × 560 × 510 mm and the DMV 110 has 1,100 × 600 × 510 mm of travel. The NVX 5100 has 1,050 × 530 × 510 mm, slightly less X and Y on the same Z.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.