The Hwacheon MEGAII-100 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF Plus. a top spindle speed of 5 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon MEGAII-100 heavy lathe: Ø1,000 mm swing, 3,000-10,000 mm centres, 8 t workpieces, 24 in chuck, 45 kW, up to 17,220 Nm, hydraulic tool post.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 400 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 3,000 mm |
| Maximum Spindle Speed | 5 RPM |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Bed | Ø1,000 mm (Ø39.37 in) |
| Swing Over Cross Slide | Ø200 ~ Ø700 mm (Ø7.87 ~ Ø27.56 in) |
| Max Turning Diameter | Ø1,000 mm (Ø39.37 in) over bed |
| Distance Between Centers | 3,000 / 4,000 / 5,000 / 6,000 / 7,000 / 8,000 / 10,000 mm (118.11 / 157.48 / 196.85 / 236.22 / 275.59 / 314.96 / 393.7 in) |
| Max Workpiece Weight | 8 t (17,637 lb) |
| X Axis Travel | 400 mm (15.75 in) |
| Z Axis Travel | 3,000 / 4,000 / 5,000 / 6,000 / 7,000 / 8,000 / 10,000 mm (118.11 / 157.48 / 196.85 / 236.22 / 275.59 / 314.96 / 393.7 in) |
| Chuck Size | 24 in |
| Spindle Nose | A2-15 (Ø155, Ø255 bore) / A2-20 (Ø320 bore) |
| Spindle Bore | Ø155 / Ø255 / Ø320 mm (Ø6.1 / Ø10.0 / Ø12.6 in) |
| Spindle Torque | 941 kgf·m (Ø155 bore) / 1,168 kgf·m (Ø255) / 1,756 kgf·m (Ø320) (9,228 / 11,454 / 17,220 Nm) |
| Spindle Speed Ranges | Auto 3-steps |
| Max Spindle Speed | 5 ~ 750 rpm (Ø155 bore) / 5 ~ 650 rpm (Ø255) / 5 ~ 400 rpm (Ø320) |
| Spindle Motor Power | 45 / 37 kW (60.3 / 49.6 hp) |
| Rapid Traverse X | 6 m/min (236.22 ipm) |
| Rapid Traverse Z | 6 m/min (236.22 ipm) on the 3000-5000 beds; 5 m/min (196.85 ipm) on the 6000-10000 beds |
| Tool Post | Hydraulic 4-way (square) tool post, □200 mm |
| Turret Stations | 4 tools |
| Tool Shank Size | □40 mm |
| Tailstock | Built-in type |
| Tailstock Quill Diameter | Ø200 mm (Ø7.87 in); Ø250 mm (Ø9.84 in) on the 10000 bed |
| Tailstock Center | MT No.6 |
| Tailstock Quill Travel | 260 mm (10.24 in) |
| Bed Width | 1,000 mm (39.37 in) |
| Bed Length | 5,492 to 12,492 mm (216.22 to 491.81 in) depending on centre distance |
| Bed Type | 3-Way (1-Bed) |
| Cross Slide | Short Carriage / Square |
| Coolant Tank | 220 to 570 L (58 to 151 gal) depending on bed length |
| Power Requirement | 76 kVA on 3000-5000 beds; 84 kVA on 6000; 90 kVA on 7000-10000; 220 V, 60 Hz |
| Machine Dimensions | 7,992 to 14,992 x 3,400 x 2,310 mm (314.65 to 590.24 x 133.86 x 90.94 in) (L x W x H) |
| CNC Control | FANUC 0i-TF Plus |
According to secondary market equipment benchmarks for November 2026, the Hwacheon MEGAII-100 is estimated between $48,000 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $744 / month.
Swing and X travel. The MEGAII-100 swings Ø1,000 mm (Ø39.37 in) with 400 mm (15.75 in) of X. The MEGAII-120 swings Ø1,200 mm with 500 mm of X, and the MEGAII-140 Ø1,400 mm with 600 mm of X. Spindle, chuck, tool post, bed and tailstock are the same on all three.
A 24 in chuck instead of 18 in, 45 / 37 kW (60.3 / 49.6 hp) instead of 22 / 18.5 kW (29.5 / 24.8 hp) with FANUC on the MEGA+100, and a hydraulic □200 mm tool post for □40 mm shanks. It also carries a stated workpiece rating of 8 t (17,637 lb).
A 4-way square tool post of □200 mm that indexes hydraulically, holding four □40 mm shank tools. Four positions cover a roughing, finishing, grooving and threading set on a shaft, but a part needing more tools needs a manual change.
Three bores. Ø155 mm (Ø6.1 in): A2-15, 750 rpm, 941 kgf·m (9,228 Nm). Ø255 mm (Ø10.0 in): A2-15, 650 rpm, 1,168 kgf·m (11,454 Nm). Ø320 mm (Ø12.6 in): A2-20, 400 rpm, 1,756 kgf·m (17,220 Nm). All use a three-step automatic gearbox and 45 / 37 kW (60.3 / 49.6 hp).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.