The Hyundai-WIA LV4508R/L is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i-TF Plus. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA LV4508R/L vertical turning center: listed 310 mm X and 495 mm Z travel, 3,000 RPM, 12-station turret, LM guides. Not in the current lineup.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 26.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 236 mm (9.3 in) |
| Max Turning Height | 495 mm (19.5 in) |
| Table Speed Max | 3,000 RPM |
| Spindle Motor Power | 26/22/18.5 kW (34.8/29.5/24.8 hp) |
| X-Axis Travel | 310 mm (12.2 in) |
| Z-Axis Travel | 495 mm (19.5 in) |
| Rapid Traverse | 24/24 m/min (945 ipm) X/Z |
| Turret Stations | 12 |
| Guideway Type | Linear motion (LM) guides |
| Spindle Drive | Belt |
| Machine Configuration | Vertical turning center |
| CNC Control | Fanuc 0i-TF Plus |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA LV4508R/L is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
No, it is not in the current lineup. The closest current model is the LV4500 Series, which shares the 495 mm (19.5 in) Z travel, 24/24 m/min (945 ipm) rapids and 12-station turret and is listed with 320 mm (12.6 in) of X travel.
The listed figures are 310 mm (12.2 in) on X and 495 mm (19.5 in) on Z, with rapids of 24/24 m/min (945 ipm) on X/Z. Maximum turning height is 495 mm (19.5 in) and maximum turning diameter is listed at 236 mm (9.3 in).
Table speed is listed at 3,000 RPM with a belt drive. Power is given as 26/22/18.5 kW (34.8/29.5/24.8 hp). The listing does not say which of the three figures applies to which version, so check the motor plate of the machine being considered.
The listed figures show linear motion (LM) guides and a 12-station turret. No live tool speed is listed, so assume turning only unless the machine itself shows driven tooling.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.