The Mazak CV 5-500 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak CV 5-500: listed 5-axis trunnion machine with a 500 mm table, 730 / 510 / 510 mm travels, a 12,000 rpm 40-taper spindle and 30 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | BT40 / CAT40 |
| Table / Platter / Chuck Size | 500 mm diameter trunnion |
| Approx. Machine Weight | 9,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 500 mm diameter trunnion |
| X Y Z Travel | 730 mm / 510 mm / 510 mm |
| A Axis Range | -30° to +120° |
| C Axis Range | 360° continuous |
| Spindle Speed | 12,000 rpm (standard) |
| Spindle Motor | 22 kW (40-taper) |
| Spindle Taper | BT40 / CAT40 |
| Atc Capacity | 30 tools |
| Rapid Traverse | 50 m/min (X/Y/Z) |
| Cnc Control | MAZATROL SmoothG |
| Machine Weight | Approx. 9,000 kg |
| Floor Space | Approx. 2,900 × 3,200 mm |
According to secondary market equipment benchmarks for November 2026, the Mazak CV 5-500 is estimated between $127,000 and $258,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,969 / month.
It does not appear on Mazak's current model list, and the table on this page could not be matched to a manufacturer page. Use the listed figures (730 / 510 / 510 mm travels, a 500 mm diameter trunnion table, a 12,000 rpm 40-taper spindle) as a guide, and confirm them from the machine's nameplate and manuals.
The listed A-axis range is -30° to +120°, and the C axis is listed as 360° continuous. No rotary axis speeds or indexing increments are given in the table, so if cycle time depends on fast repositioning between faces, ask for those figures.
A 40-taper spindle in BT40 or CAT40 with 12,000 rpm as the standard speed and a 22 kW motor. The table gives no torque and does not state whether 22 kW is a continuous or a short-time rating, so check the spindle output diagram of the actual machine before planning heavy cuts.
According to secondary market equipment benchmarks for November 2026, the Mazak CV 5-500 is estimated between $127,000 and $258,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,969 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.