The DMG MORI SPRINT 32|9 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 31i-B5 Plus. a top spindle speed of 8,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI SPRINT 32|9: 32 mm (1.3 in) bar automatic with B axis, 6 linear axes, 8,500 rpm spindles (40.4 Nm main), 41 tool stations, FANUC control.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 31i-B5 Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 8,500 RPM |
| Spindle Motor Rating | 5.5 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 41 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 70 mm (2.8 in) |
| Y-Axis Travel | 405 mm (15.9 in) |
| Z-Axis Travel | 100 mm (3.9 in) |
| Max Workpiece Diameter | 32 mm (1.3 in) |
| Max Workpiece Length | 240 mm (9.4 in) |
| Max Bar Capacity | 32 mm (1.3 in) |
| Driven Tool Stations | 8 driven tool stations as standard |
| CNC Control | FANUC 31i-B5 Plus |
| Driven Tool Speed | 6,000 rpm, 3 Nm, 1 kW |
| Max Spindle Speed | 8,500 rpm (main spindle) |
| Spindle Motor Power | 5.5 kW (main spindle) |
| Spindle Torque | 40.4 Nm (main spindle) |
| Sub Spindle Speed | 8,500 rpm, 14 Nm, 2.2 kW (counter spindle) |
| Tool Capacity | Total of 41 tool stations |
| Controlled Axes | 6 linear axes, 2 C-axis and 1 B axes |
According to secondary market equipment benchmarks for November 2026, the DMG MORI SPRINT 32|9 is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
It lets a tool be set at an angle to the part, so inclined holes and angled surfaces can be machined in the same cycle as the turning. DMG MORI lists the machine with 6 linear axes, 2 C-axes and 1 B axis. The swivel range is not given in the Highlights, and the driven tools that do the cutting are rated 6,000 rpm, 3 Nm and 1 kW.
The main spindle runs at 8,500 rpm with 40.4 Nm and 5.5 kW. The counter spindle runs at 8,500 rpm with 14 Nm and 2.2 kW. Both are integrated spindle motors with direct measuring systems. Bar capacity is 32 mm (1.3 in).
DMG MORI presents it as an automatic turning machine. The SWISSTYPEkit, described as allowing short and long part turning on one machine, is an option, so whether a given machine can run long parts that way depends on how it was ordered. Maximum workpiece length is 240 mm (9.4 in).
A total of 41 tool stations. 8 driven tool stations are standard, with driven tool spindles at 6,000 rpm, 3 Nm and 1 kW. Up to 2 tools can work simultaneously.
A FANUC 31i-B5 Plus, with a 10.4 in colour display on the control panel. It manages 2 control channels, 6 linear axes, 2 C-axes and a B axis. Tool monitoring with a graphical tool load display can be added as an option.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.